Front Proximity Sensor & Reverse Parking Sensor

Front Proximity Sensor

In today's driving environment where roads and parking spaces are getting smaller, and the indiscreet parking of vehicles by other road users, new vehicles designs that have more blind spots, the need for a reliable Parking Aid system had become imperative in order to assist the driver to park and maneuver the vehicles effortlessly in any situation whilst preventing accidents during parking.

Our 3rd Generation Micro sensors utilizes the most advanced ultrasonic asymmetric sensing technology that is able to detect an extremely wide angle of 160 degrees horizontally and 60 degrees vertically to achieve a great sensing distance which cannot be found in conventional parking systems.

Front LED Display (Windscreen Mounted)

The 3rd Generation Micro sensors are designed to blend into all bumpers and can be color-coded to obtain the original factory fitted look. The intelligent software provides superb accuracy in detecting narrow and round objects, self-diagnostics for all sensors at every start-up of the system and the option for selection to extend the final zone for vehicles with rear spare wheels or tow bars. Our sophisticated Noise Reduction System prevents false alarms from rain or wind.

The device has a choice of two sensors for compact cars and four sensors for larger cars, fitted onto the front bumper. The system will be activated when power is switched ON, indicated by the center LED light-up in the LED display. The LED lights will indicate the presence of objects and the distance in front of the vehicles. Upon approaching the 30cm from the object, the buzzer will emit a two seconds constant beep alerting the driver to stop.

Benefit & Advantages

Paint-able sensor surface area which can match any car bumper color.
Environment noise reduction such as rain drops & wind pockets.
Self-diagnostics at every start-up.
Specially designed sensor enables mounting on low bumpers or bumpers with axis to ground.

Reverse Parking Sensor

Show Animation

Rear LED Display (Roof Top Mounted)

The device has a choice of two sensors for compact cars and four sensors for larger cars, fitted onto the rear bumper. The system will be activated when the reverse gear is engaged, indicated by a single beep. The progressive beeping tones will alert the driver of any presence of objects and the distance behind the vehicle. For system with LED display, there will be visual and audible alerts with the buzzer built into the LED display. Upon approaching the 30cm from the object, the buzzer will emit a continuous beep alerting the driver to stop.

Benefit & Advantages

Paint-able sensor surface area which can match with any car bumper color.
Specially designed sensor enables mounting on low bumpers or bumpers with axis to ground.
Self-diagnostics at every start-up.
Last zone extend option for zoning selection for vehicles with rear spare tire, trailer tow bar or bicycle rack.

Specifications

Description	Detail
Supply voltage	DC 10V to 25V
Max. power consumption	0.5W
Max. current consumption	20mA (Buzzer), 200mA (LED Display)
Operating temperature	-30°C to 80°C
Storage temperature	-40°C to 80°C
Operating humidity	Up to 95%
Transmitting frequency	40kHz
Buzzer frequency	1kHz
Buzzer sound level	80db at 10cm
System response time	0.12sec
Estimated Installation Time	Under 45 minutes for 4 sensors

Why Choose Us?

Description	Our Systems	Conventional Systems
Sensing Technology	Asymmetric	Symmetric
Sensor Length	16mm	Usually 25mm
Sensor Diameter	19mm	Usually 22mm & above
Sensor Connector	Yes	No
Self-Diagnostic	Yes	No
Buzzer	Adjustable volume	Mono
Detection (Front)	Up to 3 feet with speed cut-off	Usually replace with rear sensor system
Detection (Rear)	5.5 feet	4 feet
Blanking Option (Rear)	Yes	No
Warranty Period	3 years or 100,000km	Usually 1 year
Parts Availability	3 years after last vehicle	Unknown
Product Homologation	TUV, FCC, CE, e1, e11, EMC, EMI	Unknown
Product Development	In-house R&D	Unknown