General
 |
Parking Sensor is the latest
state of the art invention for reversing or parking vehicles safely
and easily. The system uses high tech ultrasonic sensors that
are fitted at the rear bumper. The system is activated when reverse
gear is engaged and indicated by a single beep.
Parking Sensor will continuously monitor the
available distance within detection zone from vehicle to any obstacles
within the detection zone. Beeping tone alerts drivers of the
presence of objects behind the vehicle. The frequency of beeping
tone will indicate object's distance. |
General Specifications:
| Power requirements:
|
10 ~ 25V |
| Max current consumption: |
250mA |
| Operating Temperature: |
-20 degress to 70 degrees C |
| Storage Temperature: |
-30 degress to 80 degrees C |
| Transmitting frequency: |
40kHz |
| System Response Time: |
0.12sec |
| Operating Humidity: |
95% |
| Buzzer Frequency in Operating: |
1kHz |
| Buzzer Frequency in Sensor Malfunction: |
1.25kHz (Optional feature) |
| Buzzer Sound Pressure Level: |
80db at 10cm |
|
 |
Each standard model comes in a with a Control Unit, Buzzer with 6'
cable, 2 or 4 Sensors with 8' cables, 4' power cable, Screws and nuts,
Bracket for Control Unit, Double sided tape, Cable Ties and Owner's
manual.
All of our range of parking sensors can also be used with an OPTIONAL
display module.
Cone Sensor Models
Cone Sensor has horizontal coverage
of approximately 120 degrees. It can be utilized as either a 2-sensor
model or 4-sensor model. Its distinct advantage is the rubber sensor;
which is more durable for rough and rugged use by commercial vehicles.
The product can also be installed with an OPTIONAL metal bracket, where
certain areas of the bumper are not suitable for drilling. Without a
bracket, the sensors can be installed by drilling a 25mm hole on the
bumper.
Model No.
|
Description |
Drill Hole Size |
Paintable |
Sensor Casing Material |
Bumper |
Type Sensor Photo |
| XP120R |
Cone Rubber |
25mm |
No |
Rubber |
Steel/Plastic |
 |
Flat Sensor Models
Flat Sensor has an ultra-wide detection
range, approximately 170 degrees, which is suitable for wider vehicles.
Apart from that, the sensor and casing can also be sprayed to follow
the bumper's colour. The flat sensor has also a rubber ring around the
sensor, giving it an exclusive look. The Flat Sensor can also be utilized
as either as a 2-sensor or 4-sensor model. Flat Sensor is also installed
by drilling 25mm holes on the bumper. No bracket is available for Flat
Sensor.
Model No.
|
Description |
Drill Hole Size |
Paintable |
Sensor Casing Material |
Bumper Type |
Sensor Photo |
| XP220R |
Flat Round |
25mm |
Yes |
Plastic with Rubber Ring |
Plastic Only |
 |
| XP220B |
Flat Oblong |
25mm |
Yes |
Plastic with Rubber Ring |
Plastic Only |
 |
| XP320S |
Micro Rubber
(10° angled upwards
for slanted bumpers) |
19mm |
No |
Rubber |
Steel/Plastic |
 |
Micro Sensor Models
Micro Sensor is the Third Generation
of Parking Sensor. It is not only smaller, it can be fully spray painted
to the car bumper's colour. Only 19mm drill hole is required to install
each micro sensor. It utilizes a similar technology as the Flat Sensor;
but the coverage lesser (approximately 150 degrees) to cater for various
types of passenger vehicles. An OPTIONAL plastic bracket is also available
for those who have problems drilling holes to their car bumper. Just
as the other generation of parking sensor, this range is also available
in 2 or 4 sensor models.
Model No.
|
Description |
Drill Hole Size |
Paintable |
Sensor Casing Material |
Bumper Type |
Sensor Photo |
| XP320R |
Micro Round |
19mm |
Yes |
Plastic |
Plastic Only |
 |
| XP320F |
Micro Flush |
19mm |
Yes |
Plastic |
Plastic Only |
 |
| XP320E |
Micro Oval |
19mm |
Yes |
Plastic |
Plastic Only |
 |
| XP320C |
Micro Octagon |
19mm |
Yes |
Plastic |
Plastic Only |
|
| XP320P |
Micro Angle (10° angled upwards
for slanted bumpers) |
21mm |
Yes |
Plastic |
Plastic Only |
 |
| XP320S |
Micro Rubber (10° angled upwards
for slanted bumpers) |
19mm |
No |
Rubber |
Steel/Plastic |
 |
